Aego³ and Sound3ar | Acoustic Energy

Aego³ and Sound3ar

Acoustic Energy Aego3 systemAego³: 2016 – Present
Aego Sound3ar: 2016 – Present

There is no sound from Sound3ar

When using the Sound3ars optical input the source component should be switched to “PCM Audio”.

Need more help? Please email technical@acoustic-energy.co.uk

I can’t get sound using Bluetooth on my computer/laptop?

Bluetooth connections on laptops are used for peripheral items (such as keyboards, printers, etc) and not sound. You will need to wire it via the analogue or digital connections.

Need more help? Please email technical@acoustic-energy.co.uk

I’ve only got one speaker cable

Both the Aego³ and Sound3ar use the same cable to connect the satellites or Sound3ar to the subwoofer. For use with the satellites you will need to split the 2 phono cable to each speaker for the left and right channels. This should be done by carefully pulling the cable apart at one end from the phono plugs, the cable is designed to split.

Need more help? Please email technical@acoustic-energy.co.uk

How do I connect via Bluetooth?

When selecting the Bluetooth® input (indicated by a blue LED on the Subwoofer display panel) for the first time, the system will go into “pairing” mode and be visible to Bluetooth®- enabled devices for connection as “AEGO3”. Once paired with the Aego³ the Bluetooth® source device will play audio wirelessly through the system and operate overall volume level if the function is available.

Whenever the Bluetooth input is selected in future it will attempt to pair with previously connected devices and become visible to new devices if no previous connections are available. Pairing mode can also be manually selected by pressing the “Pair” button; when the system is in pairing mode the blue LED on the Subwoofer display panel will flash, when connection is made the blue LED will remain lit and an audible “beep” will be heard. The most recently connected device always takes preference when attempting to play audio.*

*For instructions on source device’s Bluetooth® operation please refer to that device’s manual or manufacturer.

Need more help? Please email technical@acoustic-energy.co.uk

Can I use a learning remote control?

Both the Aego³ and Sound3ar use the same remote control.

If you wish, a Learning Remote Control can also be used to control the systems. You will need to use the existing Aego³ remote control to programme the learning remote.

Need more help? Please email technical@acoustic-energy.co.uk